Manual Ch Setting - Pioneer DVR-520H Operating Instructions Manual

13 The Initial Setup menu
Note
• You can fine-tune individual stations using the
Manual CH Setting feature. See Manual CH Setting
below for how to use this.
Auto Channel Setting : Download from TV
If you connected this recorder to your TV using the
AV1(RGB)-TV AV connector, and if your TV supports this
function, you can download all the channels that your TV
is tuned to. Check your TV's instruction manual for more
details.
1 Choose 'Download from TV'.
Initial Setup
Basic
Tuner
Video In/Out
Audio In
Audio Out
Language
Recording
Playback
2 Select your country.
Initial Setup
Basic
Tuner
Video In/Out
Audio In
Audio Out
Language
Recording
Playback
3 Press ENTER to start downloading.
After downloading has finished, the channel mapping
screen appears showing which channels have been
assigned to which program numbers.
Tip
• If the channel tuning information is updated in the
TV, the recorder will automatically download the new
information.

Manual CH Setting

The channel skip function lets you skip channels where
there is no station so that as you change channels using
the CHANNEL +/– buttons or the number buttons, you
only change to channels that have a station.
The manual tuning function allows you to manually tune
to stations, should you need to.
100
En
Auto Channel Setting Auto Scan
Manual CH Setting Download from TV
Channel Swapping
Set VIDEO Plus+ CH
Auto Channel Setting
Auto Channel Setting Auto Channel Setting
Manual CH Setting
Country
UK
Channel Swapping
Set VIDEO Plus+ CH
Downloading Pr 5
Cancel
1 Select 'Manual CH Setting', then 'Next Screen'.
Initial Setup
Basic Auto Channel Setting
Tuner Manual CH Setting
Video In/Out Channel Swapping
Audio In Set VIDEO Plus+ CH
Audio Out
Language
Recording
Playback
Press ENTER to go to the country setting screen.
2 Select your country.
Initial Setup
Auto Channel Setting Manual Channel Setting
Basic
Manual CH Setting
Tuner Manual Channel Setting
Country
Channel Swapping
Video In/Out
Audio In Set VIDEO Plus+ CH
Audio Out
Language
Recording
Playback
3 Press ENTER to go to the manual channel setting
screen.
Skip
CH System
Channel
AFT
Level
Sound System
Name
Decoder
• Use the CHANNEL +/– buttons or the number
buttons to change channels.
From this screen there are eight parameters you can set:
• Skip – If you want to skip the displayed channel
(because there is no station assigned to that
channel), change the Skip setting to On.
• CH System – Set the channel system used in your
area or region.
• Channel – Change the channel number assigned to
the current preset.
• AFT (Auto Fine Tune) – When set to On, the station is
automatically tuned; set to Off to manually fine tune
(see below).
• Level – Set the AFT level (see above).
• Sound System – Set the sound system used for the
current channel.
• Name – Move the cursor right then input a name for
the current station, (up to five characters) then press
ENTER.
• Decoder – If the current channel is scrambled,
requiring a decoder connected to the AV2/AUTO
START REC (INPUT 1/DECODER) connector, set this
to On. (See also AV2/L1 In on page 102.)
Next Screen
UK
Pr 1
Off
UK & IE
2
On
I
Off