Setting The Picture Quality For Disc Playback - Pioneer DVR-520H Operating Instructions Manual

The Video/Audio Adjust menu
4 Use the (cursor left/right) buttons to adjust
the currently selected picture quality setting.
5 When you have all the settings as you want
them, press HOME MENU to exit.
You can now use the preset for any other input or the
built-in TV tuner.
Tip
• To see more of the picture as you adjust different
settings, press ENTER after selecting the setting you
want to adjust.
Note
• DVR-520H/720H only: When the DV input is selected,
only VNR and Detail settings can be adjusted.
• When White AGC is On, the White Level setting
can't be adjusted.
• The 3-D Y/C and Black Setup settings apply only to
NTSC video input.
Setting the picture quality for disc
playback
This setting determines how the picture will look when
playing discs.
Choosing a preset
1 With a disc playing (or paused), press HOME
MENU and select 'Video/Audio Adjust'.
2 Select 'Video Adjust'
3 Use the (cursor left/right) buttons to
change the setting.
TV(CRT)
Detailed Settings
There are six presets available:
• TV(CRT) – suitable for standard cathode-ray tube TVs
• PDP – suitable for plasma display screens
• Professional – suitable for professional monitors
• Memory1 – user preset 1
• Memory2 – user preset 2
• Memory3 – user preset 3
You can press DISPLAY to see the individual settings for
the current preset (TV(CRT), PDP or Professional).
4 Press ENTER to select the preset.
Creating your own set
There are three user presets in which you can save your
own set of picture quality settings for disc playback.
1 Follow Choosing a preset above and select one of
the user presets (Memory 1, 2 or 3).
2 Move the cursor down and select 'Detailed
Settings'.
Memory1
Detailed Settings
3 Select the picture quality setting you want to
adjust.
Memory1
YNR
CNR
QNR
Detail
White Level
Black Level
Black Setup
You can adjust the following settings:
• YNR – Adjusts the amount of noise reduction (NR)
applied to the Y (brightness) component.
• CNR – Adjusts the amount of noise reduction (NR)
applied to the C (colour) component.
• QNR – Adjusts the amount of noise reduction (NR)
applied to the block noise.
• Detail – Adjusts how sharp edges appear.
• White Level – Adjusts the intensity of white.
• Black Level – Adjusts the intensity of black.
• Black Setup – Corrects the standard reference black
level (NTSC video only).
• Hue – Adjusts overall balance between red and
green.
• Chroma Level – Adjusts how rich the colours
appear.
4 Use the (cursor left/right) buttons to adjust
the currently selected picture quality setting.
5 When you have all the settings as you want
them, press HOME MENU to exit.
Tip
• To see more of the picture as you adjust different
settings, press ENTER after selecting the setting you
want to adjust.
Off Max
Off Max
Off Max
Off Max
Min Max
Min Max
0 IRE
12
95
En