Pioneer DVR-520H Operating Instructions Manual page 42

05 Playback
On the left side is the program list, then to the right is a
list of titles (DVD), folders (WMA/MP3), or tracks (CD,
Video CD/Super VCDs). On the far right is a list of
chapters (DVD) or tracks (WMA/MP3).
3 Select a title, chapter, folder or track for the
current step in the program list.
For a DVD disc, you can add a whole title, or a chapter
within a title to the program list.
• To add a title, select the title.
• To add a chapter, first highlight the title, then press
(cursor right)and select a chapter from the list.
Program
Step
01. 01-003
02.
03.
04.
05.
06.
07.
08.
For a CD or Video CD/Super VCD, select a track to add to
the program list.
Program
Step
01. 04
02.
03.
04.
05.
06.
07.
08.
For a WMA/MP3 disc, you can add a whole folder, or a
track within a folder to the program list.
• To add a folder, select the folder.
• To add a track, first highlight the folder, then press
(cursor right) and select a track from the list.
Program
Step
01. 01-003
02.
03.
04.
05.
06.
07.
08.
After pressing ENTER to add the title/chapter/folder/
track, the step number automatically moves down one.
• To insert a step into the program list, highlight the
step number where you want to insert another step,
then select a chapter/title/folder/track as usual. After
pressing ENTER, all the subsequent steps move
down one.
• To delete a step from the program list, highlight the
step you want to delete, then press CLEAR.
42
En
Title (1-38)
Chapter (1-004)
Title 01 Chapter 001
Title 02 Chapter 002
Title 03 Chapter 003
Title 04 Chapter 004
Title 05
Title 06
Title 07
Title 08
Track (1-12) Total Time 0.00.00
Track 01
Track 02
Track 03
Track 04
Track 05
Track 06
Track 07
Track 08
Folder (1-06)
Track (1-010)
01. Pop
001. Track 01
02. Electronic
002. Track 02
03. Jazz 003. Track 03
04. Indie 004. Track 04
05. Rock 005. Track 05
06. Classic 006. Track 06
007. Track 07
008. Track 08
4 Repeat step 3 to build up a program list.
A program list can contain up to 24 titles/chapters/
folders/tracks.
5 To play the program list, press
Program play remains active until you turn off program
play (see below), erase the program list (see below), eject
the disc or switch off the recorder.
Tip
• To save your program list and exit the program edit
screen without starting playback, press HOME
MENU or PLAY MODE.
• You can change the program list by selecting Input/
Edit Program from the Play Mode Program menu.
• During program play, press
program step.
• Press CLEAR during playback to switch off program
play (if no menu OSD, such as the Disc Navigator, is
displayed). Press while stopped to erase the program
list.
Other Program play functions
As well as creating and editing a program list, you can
start program play, cancel program play, and erase the
program list from the Play Mode menu.
1 Press PLAY MODE and select 'Program' from the
list of functions on the left.
2 Select a program play function.
• Input/Edit Program – See above
• Start Program Play – Starts playback of a saved
program list
• Cancel Program Play – Turns off program play, but
does not erase the program list
• Erase Program List – Erases the program list and
turns off program play
Note
• When playing a program list of DVD-Video chapters,
chapters not included in the program list may be
sometimes be played, depending on the disc.
• You can use repeat play with program play. Start
playback of the program list then select Program
Repeat from the Repeat Play Mode menu (see
Repeat play on page 41).
PLAY.
to skip to the next