Pioneer DVR-520H Operating Instructions Manual page 86

08 Editing
Chapter Edit (Chpt Edit)
VR mode
When editing VR mode DVDs you can edit individual
chapters within a title, with commands for erasing,
moving, combining and dividing. You can also play
individual chapters to check their content.
1 Select 'Chpt Edit' from the Disc Navigator Play
List menu options.
2 Select the title that contains the chapters you
want to edit, then press ENTER.
After selecting a title, thumbnails of each chapter appear
and you'll see that the Disc Navigator menu items
change to the chapter editing commands:
Chapter Edit
Play List
DVD
Erase
Divide
Combine
Move
Undo
Back
• Erase – Erase chapters: Select the chapter you want
to erase and press ENTER.
• Divide – Divide a chapter into two or more parts:
Select the chapter you want to divide. From the
following screen use the playback controls ( , ,
, , etc.) to find the point at which you want to
divide the chapter. With Divide highlighted, press
ENTER.
Divide Chapter
Play List
DVD
Divide
Back
You can keep dividing the chapter as many times as
you want (up to 999 chapters per disc). Highlight
Back and press ENTER to return to the Chapter Edit
screen.
• Combine – Combine two adjacent chapters into one:
Select the dividing line between two adjacent
chapters and press ENTER.
• Move – Rearrange chapters: Select the chapter you
want to move, press ENTER, then highlight the new
location for it, then press ENTER again.
86
En
Title Chapter
15:00 Wed11/12 Pr 5 LP
1
1 2 3
4 5 6
7 8 9
Title 15:00 Wed 13/12 Pr 5 LP Chapter
1 Recording Time 0h01m24s
1-3 0.00.52.17
Play Pause
Divide
• Preview – Preview chapters: Select the chapter you
want to play; press
edit screen.
• Undo – Undo the last command.
3 Press RETURN to get back to the menu options on
the left side of the screen.
4 To return to the Disc Navigator screen, press
RETURN again, or select 'Back' from the menu
options on the left.
Erase Section (Erase Sec)
VR mode
Using this command you can delete a part of a Play List
title, ideal for cutting out the commercial breaks in a
recording made from the TV.
1 Select 'Erase Sec' from the Disc Navigator menu
0h03m
options.
2 Use the
title.
After selecting a title, the Erase Sec screen appears from
which you can mark the start and end points of the
1/1
section to erase.
3 Use the playback controls ( , ,
0h00m
find the start of the section to erase, then (with
'From' highlighted) press ENTER.
The bar at the bottom of the screen shows the current
play position in the title. After pressing ENTER, a marker
appears under the bar to show the start of the section.
4 In the same way, find the end of the section to
erase, then (with 'To' highlighted) press ENTER.
After pressing ENTER, another marker appears under the
bar to show the end of the section, with the section itself
marked in red.
STOP to return to the chapter
(cursor buttons) to select a
Erase Sec
Play List
DVD 15:00 Wed 13/12 Pr 5
Title 1
Recording Time
1-2
Play Pause
A
Erase Sec
From
Back
Play Pause
A
From
0.02.09.17
A
LP
0h01m24s
0.00.52.17
B
To
, , etc.) to
B
T