Manual Ch Setting - Pioneer DVR-320-S Operating Instructions Manual

The Initial Setup menu
12
After auto scanning has finished, the channel mapping
screen appears showing which channels have been
assigned to which program numbers.
Initial Setup
Channel Mapping
Pr System
1 B/G
2 B/G
3 B/G
4 B/G
5 B/G
6 B/G
7 B/G
8 B/G
Use the PREV/NEXT buttons to display the previous/next
page.
3 Press HOME MENU to exit this screen.
Note
• You can fine-tune individual stations using the
Manual CH Setting feature. See Manual CH Setting
below for how to use this.

Manual CH Setting

The channel skip function lets you skip channels where
there is no station so that as you change channels using
the CHANNEL +/– buttons or the number buttons, you
only change to channels that have a station.
The manual tuning function allows you to manually tune
to stations, should you need to.
1 Select 'Manual CH Setting', then 'Next Screen'.
Initial Setup
Basic
Tuner
Video In/Out
Audio In
Audio Out
Language
Recording
Playback
Press ENTER to go to the country setting screen.
2 Select your country.
Initial Setup
Basic
Tuner
Video In/Out
Audio In
Audio Out
Language
Recording
Playback
76
En
1/7
CH Name Pr System CH Name
26 9 B/G 9
33 10 B/G 25
23 11 B/G 11
30 12 B/G 12
37 13 B/G 13
35 14 B/G 14
39 15 B/G 15
26 16 B/G 16
Auto Channel Setting Next Screen
Manual CH Setting
Channel Swapping
G-Code CH Setting
Manual Channel Setting
Auto Channel Setting
Manual Channel Setting Manual CH Setting
Country
Singapore
Channel Swapping
G-Code CH Setting
3 Press ENTER to go to the manual channel setting
screen.
Skip
CH System
Channel
AFT
Level
Sound System
Name
• Use the CHANNEL +/– buttons or the number
buttons to change channels.
From this screen there are eight parameters you can set:
• Skip – If you want to skip the displayed channel
(because there is no station assigned to that
channel), change the Skip setting to On.
• CH System – Set the channel system used in your
area or region.
• Channel – Change the channel number assigned to
the current preset.
• AFT (Auto Fine Tune) – When set to On, the station is
automatically tuned; set to Off to manually fine tune
(see below).
• Level – Set the AFT level (see above).
• Sound System – Set the sound system used for the
current channel.
• Name – Move the cursor right then input a name for
the current station, (up to five characters) then press
ENTER.
Channel Swapping
The preset swap feature lets you swap the channel
assignments of different programs. This is so that you
can group together station presets which naturally go
together.
1 Select 'Channel Swapping'.
Initial Setup
Basic Auto Channel Setting
Tuner Manual CH Setting
Video In/Out Channel Swapping
Audio In G-Code CH Setting
Audio Out
Language
Recording
Playback
Pr 1
Off
Western Euro
2
On
B/G
Next Screen