Programming System - Pioneer DVR-230-S Operating Instructions Manual

Recording
5 To exit the timer recording screen, press HOME
MENU.
Timer recording using the G-Code

programming system

This system makes programming timer recordings very
simple. Most TV guides publish G-Code programming
numbers with their program details. If you want to make
a timer recording of a program, you just input the
corresponding code. The date, start, stop and channel
settings are made automatically. All you have to do is tell
the recorder the recording mode, and whether it's a
once-only recording or a regular recording.
1 2
4 5
7 8
HOME
MENU
1 Press 'G-Code' to display the G-Code program
screen.
You can also access this screen from the Home Menu
(press HOME MENU, select Timer Recording, then G-
Code system.).
2 Use the number buttons to enter a G-Code
programming number, then press ENTER.
To clear the last digit entered, press CLEAR.
G-Code system
G-Code#
(0) - (9) to input
®
3
G
-
CODE
6
CLEAR
9 0
ENTER
3 9 9 2 4
3 If you want to change the recording quality, use
the buttons to highlight Rec Mode, then use
the buttons to change.
Timer Rec (View)
Date Start
SUN 12/12 07 : 00
Program Set
• See also Recording time and picture quality on
page 33 and Setting the picture quality/recording time
on page 34.
4 After making the settings, press ENTER.
• If you haven't set up the guide channels (or at least
the guide channel for the G-Code programming
number that you entered), the recorder will prompt
you to enter the channel number that the TV program
is showing on.
Tip
• You can check the timer program settings by
displaying the timer recording screen.
Extending a timer recording in progress
You can extend a timer recording beyond the
programmed end time in two different ways. This can be
useful if a broadcast program overruns, for example.
HOME
MENU
ì REC
Moving the end time by 30-minute blocks
During timer recording, press and hold ì REC for
1
three seconds.
The timer indicator disappears from the front panel
display.
Press ì REC repeatedly to extend recording in 30
2
minute increments.
Stop CH Rec Mode
08 : 00 Pr01 SP
ENTER
TIMER REC
06
37
En