Getting Started; Switching On And Setting Up - Pioneer DVR-230-S Operating Instructions Manual

Getting started

04
Chapter 4
Getting started

Switching on and setting up

When you switch the recorder on for the first time, you
can make several basic settings using the Setup
Navigator. This takes you through setting the clock and
the internal TV tuner settings.
If you're using the recorder for the first time, we strongly
recommend you use the Setup Navigator before starting
to use the recorder.
1 Switch on your TV and set the video input to this
recorder.
2 Press the STANDBY/ON button on the remote
control or the front panel to switch on.
• When you switch on for the first time, your TV should
display the Setup Navigator screen. (If the Setup
Navigator doesn't appear, you can also access it from
the Initial Setup menu; see page 45).
18
En
STANDBY/ON
ENTER
DVD RECORDER
3 Use the (cursor left/right) buttons to
choose a language, then press ENTER.
OSD Language
OSD Language English
4 Press ENTER to start setting up using the Setup
Navigator.
Setup Navigator
Complete this setup before you start using your recorder.
Start
Cancel
Please use the Initial Setup if you want to make more
detailed settings.
• If you don't want to use the Setup Navigator, press
(cursor down) to select Cancel, then press ENTER to
exit the Setup Navigator.
5 Select 'Auto Scan' to start automatic channel
setup, then press ENTER.
Tuner
Auto Scan
Do not set
• Select Do not set if you want to skip setting up the
channels (because they have already been set up, for
example).
• Use the (cursor left/right) buttons to
choose your country, then press ENTER.
Country Australia