Restrictions On Video Recording; Setting The Picture Quality/Recording Time - Pioneer DVR-230-S Operating Instructions Manual

Recording
06
• Except when a recordable Video mode disc is loaded,
changing the recording mode will display the
recording time for a VR mode disc.

Restrictions on video recording

• You cannot record copy-protected video using this
recorder. Copy-protected video includes DVD-Video
discs and some satellite broadcasts. If copy-
protected material is encountered during a
recording, recording will pause automatically and an
error message will be displayed on-screen.
• Video that is 'copy-once only' can only be recorded on
a DVD-RW disc in VR mode (see below).
• When recording a TV broadcast or through an
external input, you can display copy control
information on screen. (see Displaying disc
information on-screen on page 24).
CPRM
CPRM is a copy protection system with scramble system
regarding the recording of 'copy once' broadcast
programs. CPRM stands for Content Protection for
Recordable Media.
This recorder is CPRM compatible, which means that
you can record copy-once broadcast programs, but you
cannot then make a copy of those recordings. CPRM
recordings can only be made on CPRM-compatible DVD-
RW (ver. 1.1 or higher) discs formatted in VR mode.
DVD CPRM recordings can only be played on players that
are specifically compatible with CPRM.
Recording equipment and copyright
Recording equipment should be used only for lawful
copying and you are advised to check carefully what is
lawful copying in the country in which you are making a
copy. Copying of copyright material such as films or
music is unlawful unless permitted by a legal exception
or consented to by the rightowners.
• This product incorporates copyright protection
technology that is protected by method claims of
certain U. S. patents and other intellectual property
rights owned by Macrovision Corporation and other
rights owners. Use of this copyright protection
technology must be authorized by Macrovision
Corporation, and is intended for home and other
limited viewing uses only unless otherwise
authorized by Macrovision Corporation. Reverse
engineering or disassembly is prohibited.
34
En
Setting the picture quality/recording
time
VR mode Video mode
Before starting a recording, you will usually want to set
the picture quality/recording time. There are six standard
settings available, which allow you to choose a balance
between picture quality and recording time.
REC MODE
• Press REC MODE repeatedly to select a recording
setting.
• XP – Fine picture quality
• SP – Standard play
• LP – Long play
• EP – Extended play
• SLP – Super Long Play
• SEP – Super Extended Play
The setting is indicated in the front panel display, and
shown on-screen together with the recording time for a
blank recordable disc.
Note
• Except when a recordable Video mode disc is loaded,
changing the recording mode will display the
recording time for a VR mode disc.