Remote Control - Pioneer DVR-230-S Operating Instructions Manual

The Initial Setup menu
08
Set Guide Preset
• Default setting: n/a
Guide channels are used by the G-Code system so that
the channel number specified in the G-Code
programming numbers can be guaranteed to
correspond to the correct station.
1 Select 'Set Guide Preset', then press ENTER.
Tuner
Auto CH Setup
Manual CH Setup
Channel Swapping
Set Guide Preset
2 Assign channel numbers to the guide channels as
necessary.
Look in your TV guide to see which channel numbers
should be assigned to which guide channels.
Set Guide Preset
Auto CH Setup
Manual CH Setup
Channel Swapping
Set Guide Preset
• Use the buttons to change the guide channel
for setting.
• Use the
number.
/
• Use the
10 guide channels.
3 To return to the previous screen, press ENTER or
RETURN.
OSD Language
• Default setting: English
Basic
Basic
Disc
Video
Audio
Recording
Playback
This sets the language of the on-screen menus and
displays.
48
En
Guide - Preset
Guide - Preset 1/26
1 Pr01 6 - - - -
2 Pr02 7 - - - -
3 - - - - 8 - - - -
4 - - - - 9 - - - -
5 - - - - 10 - - - -
buttons to change the channel
button to display the previous/next
Clock
Tuner
OSD Language
Display

Remote Control

Setup Navigator
Power Save
• Select 'OSD Language' then use the
buttons to select a language option.
OSD Language
OSD Language
Display
• Default setting: On
Basic
Basic Clock
Disc Tuner
Video OSD Language
Audio Display
Recording Remote Control
Playback Setup Navigator
Power Save
You can have the recorder show or hide on-screen
operation displays (for Play, Stop, etc.), and choose
whether to switch the front panel display on or off when
the recorder is in standby.
Display
OSD Screen
Front Panel
Remote Control
• Default setting: Recorder1
You only need to set this if you are using more than one
Pioneer DVD recorder in the same room.
Basic
Basic Clock
Disc Tuner
Video OSD Language
Audio Display
Recording Remote Control
Playback Setup Navigator
Power Save
So that each remote control operates only its own
recorder, make this setting different for each recorder
and remote in the room.
English
OSD Screen
Front Panel
On
On