Restrictions On Video Recording; Using The Built-In Tv Tuner - Pioneer DVR-550H-K Operating Instructions Manual

Recording
06
on the LPCM setting, use the Bilingual
Recording setting (page 116) to select the
A/L or B/R audio channel to record before
recording starts. In other cases, both
channels of a bilingual broadcast will be
recorded and you can switch on playback.
Restrictions on video
recording
You cannot record copy-protected video
using this recorder. Copy-protected video
includes DVD-Video discs and some satellite
broadcasts. If copy-protected material is
encountered during a recording, recording
will pause automatically and an error
message will be displayed on-screen.
Video that is 'copy-once only' can only be
recorded to DVD-RAM or HDD, CPRM-
compatible VR mode DVD-R/-RW (see
below).
When recording a TV broadcast or through
an external input, you can display copy
control information on screen (see
Displaying disc information on-screen on
page 73).
CPRM
CPRM is a copy protection/scrambling
system developed for the recording of 'copy
once' broadcast programmes. CPRM stands
for Content Protection for Recordable Media.
This recorder is CPRM compatible, which
means that you can record copy-once
broadcast programmes, but you cannot then
make a copy of those recordings. CPRM
recordings can only be made on CPRM-
compatible DVD-R (ver. 2.0/8x or higher) or
DVD-RW (ver. 1.1 or higher) discs formatted
in VR mode, DVD-RAM discs or on the HDD.
DVD CPRM recordings can only be played
on players that are specifically compatible
with CPRM.
Note
50
1 Channel presets are numbered 1 to 99.
En
Recording equipment and
copyright
Recording equipment should be used only
for lawful copying. You are advised to check
carefully what constitutes lawful copying in
the country in which you are making a copy.
Copying of copyrighted material such as
films or music is unlawful unless permitted
by a legal exception or consented to by the
rightowners.
This product incorporates copyright protection
technology that is protected by method claims of
certain U.S. patents and other intellectual property
rights owned by Macrovision Corporation and other
rights owners. Use of this copyright protection
technology must be authorized by Macrovision
Corporation, and is intended for home and other limited
viewing uses only unless otherwise authorized by
Macrovision Corporation. Reverse engineering or
disassembly is prohibited.

Using the built-in TV tuner

There are three different ways to select TV
channels. Note that you can't change the TV
channel during playback, recording or
during recording standby.
CHANNEL
+
CHANNEL +/– buttons
•
CHANNEL
–
REC MODE
AUDIO SUBTITLE ANGLE
PLAY MODE
Number buttons
•
For example, to select channel 4, press 4
then ENTER; for channel 34, press 3, 4,
1
ENTER.
• CH +/– buttons on the front panel
Changing audio channels
You can change the audio channel of the
broadcast or external input signal.
AUDIO
SHIFT
• Press to change the audio
+
type.
The current audio channel is displayed on-
screen.