Programmed Playback (Dvds) - Pioneer PDV-10 Operating Instructions Manual

Advanced Functions
Programmed playback - DVDs
Use the following procedure to play DVDs in a desired order. Up to 24 steps can
be programmed.
Remote control unit only
5
2, 3
4
1
Number
e
buttons
SHIFT
Notes:
• Programmed playback is not possible
during PBC playback on video CDs.
• Scenes from chapters that are not
programmed may appear when the
chapter switches, but this is not a
malfunction.
• Programming is not possible with some
DVDs. In this case the
on the screen.
• When programming chapters, only
chapters within the same title can be
96 programmed.
En
¢
3 ¡
8 E 7
1
mark appears
1
Press the PROGRAM button.
The program screen appears.
Program Chapter Program Title
Current: Title
Title 1
— — — —
— — — —
— — — —
Program Memory – Off
Move
ENTER
2
Use the cursor buttons (2/3)
to select "Program Chapter"
or "Program Title".
Program Chapter Program Title
To select chapters
3
Press the cursor button (∞) to move to
the program input/editing window.
To change the number of the title to be
programmed at the "Program Chapter"
screen, press the cursor button (5) while
at the top step of the program input/editing
window, then press the number buttons
while pressing the SHIFT button to specify
the desired title.
Program Chapter Program Title
Current: Title
Title 1
09 07 18 —
— — — —
— — — —
Program Memory – Off
Move
+ / –
ENTER
1 Chapter 1
(Chapter 1 – 30)
— — — —
— — — —
— — — —
Play Exit
PROGRAM
Program Chapter Program Title
To select titles
1 Chapter 2
(Chapter 1 – 30)
— — — —
— — — —
— — — —
Play Exit
PROGRAM