Moving The Position Of The On-Screen Display; Setting The Picture Quality - Pioneer PDV-10 Operating Instructions Manual

Moving the position of the on-screen display

Set the position of the on-screen display according to the TV type. Switch the
setup screen to the "Expert" mode before making this setting. (Page 62)
Audio1 2 Video Language
TV Screen
Picture Quality –
Still Picture –
On Screnn Display –
OSD Position
Angle Indicator –
Move
Settings: Wide
Normal*

Setting the picture quality

Set the desired picture quality.
Audio1 2 Video Language
TV Screen –
Picture Quality
i Adjust picture quality
Move
Settings: Cinema
Animation
Standard*
General Other
– 16:9 (Wide)
Standard
Auto
On
Wide
Normal
Exit
SETUP
*Factory setting
General Other
16:9 (Wide)
Cinema
Animation
Standard
Exit
SETUP
*Factory setting
Various Video Settings
• Wide: Set this to prevent the on-
screen display messages from being
partially off the picture when zoom is
selected with a wide screen TV.
• Normal: Select this position when
"Normal" or "Full" is selected with a
wide screen TV.
• Cinema: In this mode the black
portions of the picture are expressed
clearly.
• Animation: In this mode the colors
are expressed vividly.
• Standard: This is the standard picture
mode.
This setting can be changed during
playback.
71
En