Using the Battery
Attaching the battery pack and player (PDV-LC10 only)
Attach the battery pack and player to the battery case as described below.
1
2
2
1
2
38
En
1
3
ON/OFF
HOLD
Battery pack operation
1
Attach the battery pack to the
battery case.
1 Fit the terminal side of the battery
pack into the battery case.
2 Push in until it clicks.
2
Attach the player to the
battery case.
1 Align the guide hole on the rear of the
player with the rear guide on the
battery case.
2 Push in the front part of the player
until it clicks.
3
Set the power switch of the
player to ON.
• Now the player can be operated.
• When the battery pack is fully charged,
the player can play DVDs for about 3
hours and 30 minutes continuously.
• If the power is switched on while the
battery pack is not fully charged, the
player operation may sometimes
become unstable. Be sure to charge
the battery pack fully before use.