Quitting The Setup Navigator - Pioneer PDV-10 Operating Instructions Manual

Quitting the Setup Navigator

Here select whether or not to set, cancel, or redo the settings that have been
automatically set by the player.
Main unit
Remote control unit
ENTER
Cursor
buttons
4
1 3
e 8
Hint:
• Only the basic settings are set with the
Setup Navigator. To make more detailed
settings, settings must be made using the
setup screen. Refer to pages 57 to 74.
• To restore the settings made with the
Setup Navigator to the factory defaults,
slide the power button while pressing in
the RETURN button. (Page 118)
Making Settings with the Setup Navigator
ENTER
Cursor
buttons
SETUP
SETUP
¢
¡
E 7
Use the cursor buttons (5/∞) to
select how to quit the Setup
Navigator, then press the ENTER
button.
Audio1 2 Video Language
Setup Navigator
Exit Setup Navigator
i Confirm setup adjustments
Move
ENTER
• Valid: Select this to set the settings
made with the Setup Navigator.
• Invalid: Select this if you do not want
to change the settings.
• Redo: Select this to start the settings
over from the beginning.
When "Valid" or "Invalid" is selected
and the ENTER button is pressed, the
Setup Navigator quits and the screen
shown below appears automatically.
Audio1 2 Video Language
Setup Menu Mode
Setup Navigator
Parental Lock
Setup connected TV/amp and
i
disc language simultaneously
Move
ENTER
Press the SETUP button to close the
Setup Navigator screen.
General Other
Valid
Invalid
Redo
Select Exit
SETUP
General Other
Basic
Level8
Select Exit
SETUP
47
En