Installation sketch for 2 batteries
Installation sketch for 4 batteries
Swivel the water reservoir all the way
down, check the lock.
Note:
Charge the batteries before commissioning
the appliance.
See also "Charging the batteries".
Removing the batteries
CAUTION
R isk of damage due to tipping appliance;
remove batteries only if the appliance is
equipped with a cleaning head.
Remove the Intelligent Key.
Push the appliance forward about 2 m
so that the steering rollers point toward
the rear.
Lower the cleaning head.
Empty the fresh and waste water tank.
Loosen the tank lock and tilt the tank
upwards.
Clamp off the minus pole of the battery.
Clamp off the remaining cables from the
battery.
Remove the support blocks or the foam
pieces.
CAUTION
When the batteries are installed and re-
moved, the stability of the appliance can be
compromised; ensure a safe stance.
Remove the batteries.
Dispose of the used batteries according
to the local provisions.
Maintenance contract
To ensure a reliable operation of the appli-
ance maintenance contracts can be con-
cluded with the competent Kärcher sales
office.
Frost protection
In case of danger of frost:
Empty the fresh and waste water tank.
Store the appliance in a frost-protected
room.
10
8
-
EN