Frost Protection; Transport - Kärcher BR 55/60 W Ep Instructions Manual

Remove the plastic parts.
Remove the vacuum lips.
Insert new vacuum lips.
Insert the plastic parts.
Screw in and tighten the star grips.
Replacing the brush rollers
Release the wing nuts.
Remove bearing lid.
Take out the brush roller, insert a new
one (pay attention to the hexagonal in-
take of the brush rollers).
Place bearing lid.
Tighten the wing nuts.
Repeat process on the opposite side.
Replacing the Disk Brushes
Raise the disk brushes.
Turn the right disk brush by approx. 45°
in clock-wise direction. Turn the left
disk brush by approx. 45° in anti-clock-
wise direction.
Remove the disk brushes at the bottom.
Insert the new disk brushes in reverse
sequence.
Mount splash guard
(BD 55/60 W only...)
Loosen both screws.
Move both the drawing springs in the
desired position.
Align the splash guard.
Tighten both the screws.
Maintenance contract
To ensure a reliable operation of the appli-
ance maintenance contracts can be con-
cluded with the competent Kärcher sales
office.

Frost protection

In case of danger of frost:
Empty the fresh and dirt water reser-
voirs.
Store the appliance in a frost-protected
room.

Transport

Danger
Do not exceed a gradient of max. 10% up-
ward/downward slope while loading or un-
loading the machine.
25
English