Vision Fitness E3200 Assembly Manual page 6

2
STEP
E3200HRT
Only
E3200
Only
6
PINK BAG
2
STEP
• Slide the console mast cover onto
the console mast. Attach the included
wire tie in the console mast to the wire
harness coming from the frame. Pull
this wire trough the console mast while
simultaneously attaching the console
mast to the frame. Secure the console
mast to the frame by tightening the
seven screws (M8x15L) and six lock
washers (M8) with the 5
wrench. Slide the console mast cover
into place so it integrates with the
frame.
• Secure the handlebar onto the
handlebar bracket with two screws
(M8x20L) and two lock washers
(M8). Tighten with the 5
Wrench.
• Remove the four mounting screws
from the back of the console. Connect
the wire harness to the console.
Attach the console to the console mast
using the four mounting screws.
• Mount the water bottle bracket to
the console mast with the included
screws.
Allen
MM
Allen
MM