Tenda 3G150M User Manual page 93

IP?
In Setup Wizard of the Web utility interface, select "Dynamic IP"
connection type and click "Save" to activate it. As some ISPs bind
the user computer's MAC address, you need to clone the Router's
WAN MAC address to the bind21ing PC's MAC address. Select
"MAC Address Clone" in "Advanced Setting" to input your
computer's MAC address and click "Apply" to activate it.
7. How to share my computer's source with other users in
Internet？
If you want Internet users to access the internal server via the
Router such as e-mail server, Web, FTP, you can configure the
"Virtual Server" to come true.
Step 1: create your internal server, make sure the LAN users can
access these servers and know related service port. For example,
Web server's port is 80; FTP is 21; SMTP is 25 and POP3 is 110.
Step 2: in the Router's web click "Virtual Server" and select
"Single Port Forwarding".
Step 3: input the external service port given by the Router, for
example, 80.
Step 4: input the internal Web service port, for example, 80.
Step 5: Input the internal server's IP address. If your Web server's
IP address is 192.168.0.10, please input it.
Step 6: select the communication protocol used by your internal
92