Brr
hyÃDs
hvÃhqÃDhyyhvÃVr
¶ÃBvqr
8uhr
Ã
D
qpv
!
T
Ãs
Ã@r
hyÃD
vvpÃThsrÃTr
Beside S800 I/O modules with Intrinsic Safety Interfaces, Intrinsic Safety Systems
can be connected to the S800 I/O.
Intrinsic Safety System from ELCON Instruments (manufacturer outside ABB) is
supported via S800 I/O module and a special MTU.
Supported Intrinsic Safety System is the HiD Series 2000.
The S800 I/O modules are connected via MTU TU812, a standard cable and a
specific adapter board, one for each I/O module types.
For further information refer to
T
ÃT'ÃDPÃvuÃTr
vrÃ!
The following I/O modules are supported:
AI810, AO810, DI810 and DO810.
See
Figure 1-10
Safety System.
Avt
r
18
for an example of a connection between S800 I/O and Intrinsic
Intrinsic Safety System
@hyrÃsÃ8rpvÃirrrÃT'ÃDPÃhqÃD
vvpÃThsrÃTrÃ
@ypÃD
rÃhhy
.
S800 I/0
s
Ã@G8PI
and
D
vvpÃThsrÃ
3BSE 020 923R101