ABB S800 I/O User Manual page 132

Brr…hyÃDs‚…€h‡v‚ÃhqÃD†‡hyyh‡v‚ÃV†r…¶†ÃBˆvqr
6ƒƒrqv‘Ã6 Srsr…rpr†
The Modulebus has an electrical and an optical interface which are logically the same bus.
A maximum of twelve I/O modules can be connected to the electrical Modulebus and up to seven
clusters can be connected to the fiber optic Modulebus expansion. The fiber-optical interface is
intended for local distribution of I/O clusters and where more than 12 I/O modules per station are
required. Any distribution of I/O modules across the base cluster and the remote cluster(s) is
allowed, however not more than 24 I/O modules per station can be used.
The module is equipped with optical Transmitter/Receiver for up to 10 Mbit/s. Both plastic and HCS
(Hard Clad Silica) optic fiber with connectors (HP Versatile Link) can be used with TB820.
UrpuvphyÃ9h‡h
Power input
Power consumption at 24V d.c.
Power dissipation
Power supply monitoring inputs
Power output (ModuleBus)
Electrical ModuleBus
Optical ModuleBus
Fiber optic interface, two transmitters
and two receivers for
122
Uhiyr 6' U7'!ÃH‚qˆyr7ˆ†ÃH‚qr€ÃTƒrpvsvph‡v‚†Ã
D‡r€ Whyˆr
24V d.c. (19.2 - 30)
100 mA
2.4 W
Max. input voltage: 30V
Min. input voltage for high level: 15 V
Max. input voltage for low level: 8 V
24V max. = 1.5A
5V max. = 1.25A
Maximum of 12 I/O modules
Maximum of 7 I/O clusters
Max. 10 Mbit/s
3BSE 020 923R101