Cutting On Demand - CAB CU200 Operator's Manual

3 Operation

3.3 Cutting on Demand

In the "Cut on Demand" mode the print job will be split into steps, which can
be released separately.
 Choose Printing > Print on demand = On.
 4. Printer Configuration.
 Send a print job.
 Press
The first label will be printed and cut.
 Press
i
Note!
The
START signal when the I/O interface is installed on the printer.
 Configuration Manual of the printer.
.
again to print and cut the next label.
function can be released alternatively by an external
11