Symbol SPT 1700 Series Quick Reference page 7

Q u i c k
3. Insert the SPT 1700 terminal in the cradle as shown:
The terminal's battery is fully charged after approximately two
hours. You can also charge a terminal's spare battery by inserting it
in the spare battery charging slot on the back of the cradle. Once
inserted, the spare battery will be fully charged after approximately
two hours. See the SPT 1700 Cradle Quick Reference Guide (p/n
70-37840-xx) for more information.
Using the Synchronization/Charging Cable to Charge the Battery
To charge the terminal's battery using the Synchronization/
Charging Cable:
1. Make sure the battery is installed in the terminal. See Install-
ing the Battery on page 7 for instructions.
R e f e r e n c e
5