Updating Firmware Using Cleanflight; Upgrade Via Cleanflight - tbs electronics PowerCube Manual

Updating firmware using CleanFlight

The TBS COLIBRI runs with a slightly customized CleanFlight, which you can grab here:
• http://www.team-blacksheep.com/powercube/colibri-latest.zip
If you do not need features such as BST or MultiFlash, or until these features are merged into the CleanFlight
project, you can use the standard CleanFlight builds directly from the CleanFlight Configurator.

Upgrade via CleanFlight

The latest version of CleanFlight Configurator supports flashing firmware for the COLIBRI RACE. However, the
code for BST (communication with TBS CORE PRO) and the passthrough/1wire technology has not yet merged
into the CleanFlight project. Therefore, we have a custom HEX file in the ​ c olibri-latest.zip ​ . Connect the USB
with the "boot" button pressed. Alternatively, you can also use BetaFlight.
Then, go to the "Firmware Flasher"-tab. If you use a BST-supported firmware it can be selected by using "Load
Firmare (local)" button. If you do not need BST-support, use "Load Firmware (online)" to download the normal
CleanFlight firmware, then click "Flash Firmware" begin the programming process.
22