Advertisement
Quick Links
Universal Remote Control manual V0.9.1
Owner's manual
Universal Remote Control V0.9.1 (TBSLink)
For
Powersine PS1000-1800 inverter series
Omnicharge OC20-60 charger series
Designed and manufactured in The Netherlands by :
TBS Electronics BV
De Factorij 46
1689 AL Zwaag
www.tbs-electronics.com
COPYRIGHT © 2008-2009 (rev2e)
- 1 -
Advertisement
Related Manuals for tbs electronics V0.9.1
Summary of Contents for tbs electronics V0.9.1
- Page 1 Universal Remote Control manual V0.9.1 Owner’s manual Universal Remote Control V0.9.1 (TBSLink) Powersine PS1000-1800 inverter series Omnicharge OC20-60 charger series Designed and manufactured in The Netherlands by : TBS Electronics BV De Factorij 46 1689 AL Zwaag www.tbs-electronics.com COPYRIGHT © 2008-2009 (rev2e)
-
Page 2: Installation
50 meters. A TBSLink connection accepts simple CAT5 Ethernet patch cables (straight wired). To get optimal performance and safe operation from your URC and TBS device, it must be installed and used properly. Please read this manual very carefully, especially the warning and caution statements, before installing and using the URC. - Page 3 Please follow the installation instructions of your TBS device to connect the URC correctly. The URC must be connected inside the connection compartment of a TBS inverter, while it can be connected externally (bottom panel) to a TBS battery charger. - 3 -...
- Page 4 Universal Remote Control manual V0.9.1 3. URC DISPLAY AND CONTROL OVERVIEW Now that the URC is connected to the TBS device, you can turn it on which will automatically activate the remote panel as well (see chapter 3.1). Before going into...
- Page 5 This error message will automatically disappear again when the error has been solved. To turn off the TBS device or to put it into a different operating mode, you can press the power button (6) once. This will show the inverter or charger power options menu : By turning the rotary controller knob you can choose your preferred option.
- Page 6 Universal Remote Control manual V0.9.1 Note : In standby or sleep mode, an inverter still draws a very small current from the battery in order to be able to detect a power button press on the remote panel. When you are leaving the inverter off for an extended amount of time, it is advised to turn off the inverter using the local main power switch.
- Page 7 TBS Electronics (TBS) warrants this product to be free from defects in workmanship or materials for 24 months from the date of purchase. During this period TBS will repair the defective product free of charge. TBS is not responsible for any costs of the transport of this product.
-
Page 8: Technical Data
Universal Remote Control manual V0.9.1 parties, resulting from the use of the TBS product. TBS keeps the right to change product specifications without previous notice. Examples of improper use are : - Wrong cables used - Connecting the URC to a different databus or network system than TBSLink... -
Page 9: Declaration Of Conformity
Universal Remote Control manual V0.9.1 6. DECLARATION OF CONFORMITY MANUFACTURER : TBS Electronics BV ADDRESS : De Factorij 46 1689AL Zwaag The Netherlands Declares that the following product : PRODUCT TYPE : Wired Remote Control MODEL : Universal Remote Control (TBSLink)