Figure 20 Mounting The Bbu On A Wood Pole - ABB Tropos 6410 Installation Manual

Mount the BBU on a wood pole
Secure the BBU mounting plate to the pole by threading a 1/4-inch bolt through the hole in
1.
the clamp slot to the pole. The bolt should be at least 3 1/2 inches in length. Make sure that
the bracket is level
Connect the PoE + LAN output cable from the BBU LAN output port to the MGT port on
2.
the router.
3. Attach the PoE input cable to the PoE input port.
Note
When the PS079001 is remotely mounted, the data and power out cable supplied with the unit must be
replaced with an outdoor-rated Ethernet cable of sufficient length.
FIGURE 20
Tropos Routers Installation Guide, Models 6410 and 6420
(Figure 20).
Mounting the BBU on a Wood Pole
BBU mounting
plate
BBU
Data and power
PoE input
out (to 6420)
from
PS079001
Data in
Chapter 3
47