Table 5 Pin Assignments For Rj-45 Mgt Port - Serial Clients - ABB Tropos 6410 Installation Manual

TABLE 4
Wired Serial Client Scenario
two RS-232 serial clients
one RS-485 client
one RS-232 serial client
one RS-485 serial client
The following are the pin assignments for the RJ-45 MGT port when used for serial clients.
TABLE 5
Pin
1
2
3
4
5
6
7
8
Tropos Routers Installation Guide, Models 6410 and 6420
Serial Client Scenarios (continued)
Pin Assignments for RJ-45 MGT Port - Serial Clients
Option 1 (one serial port)
RS232 TX or RS485 TXRX +
GND
RS232 RX or RS485 TXRX -
Power +
Power +
not used
Power -
Power -
Recommended Wiring
• Connect the RS-232 serial clients to the MGT port on the
router according to the pin assignments in
• Provide power to the 1410 on the LAN port (note: in this sce-
nario the power applied to the LAN port must be from a stan-
dard 802.3at power supply)
• Connect the RS-485 client to the MGT port on the router
according to the pin assignments in
• Connect the RS-232 and RS-485 clients to the MGT port on
the router according to the pin assignments in
• Provide power to the 1410 on the LAN port (note: in this sce-
nario the power applied to the LAN port must be from a stan-
dard 802.3at power supply)
Option 2 (two serial ports)
RS232 (port 1) TX or RS485 TXRX +
GND
RS232 (port 1) RX or RS485 TXRX -
not used
RS-232 (port 2) RX
RS-232 (port 2) TX
not used
not used
Chapter 2
Table 5.
Table 5.
Table 5.
33