Figure 14 Deployment Scenarios; Table 7 Ordering Information - ABB Tropos 6410 Installation Manual

The deployment scenarios are shown in
mounted on the mounting bracket of the 6420/6410 router. When using the PS079001 PoE
injector without the BB063011, it can be mounted on the mounting bracket of the
6420/6410 router. The PS079001must be remote mounted when used with the BB063001.
FIGURE 14
Table 7
TABLE 7
Part Number
PS079001
BB063001
MB008003
Tropos Routers Installation Guide, Models 6410 and 6420
Deployment Scenarios
lists ordering information.
Ordering Information
Description
Outdoor PoE Injector, non-photocell Power cable, one of the following:
External Battery Backup Unit
Kit, mounting bracket, PS079001/
BBU063001
Figure 14. When using the BB063001 BBU, it should be
Required Components
Ordered Separately
• PT021004 power cable, 4 feet, 2-wire, pho-
tocell
• PT021020 power cable, 20 feet, 2-wire,
photocell
• PT031006 power cable, 6ft, 3-wire, water-
tight plug
• PT031030 power cable, 30ft, 3-wire, water-
tight plug,
MB008003 mounting bracket kit (if required)
• Outdoor rated Ethernet cables
• PS079001 power supply
Chapter 3
39