Table of Contents
Advertisement
3.1.6 Removing the Micon board assembly
(See Fig.12, 13)
(1) Disconnect the connector wire from Power transformer
connected to connector
bly. (See Fig.12)
(2) Disconnect the card wire from Power trans board assembly
connected to connector
bly. (See Fig.12)
(3) Disconnect the card wire from DVD mechanism assembly
connected to connector CN21,
Micon board assembly. (See Fig.12)
(4) Disconnect the card wire from the USB jack board assem-
bly connected to connector
sembly. (See Fig,12)
(5) Remove the two screws K attaching the Micon board as-
sembly. (See Fig.12)
(6) Remove the four screws L attaching the Micon board as-
sembly. (See Fig.13)
CN202
of the Micon board assem-
CN201
of the Micon board assem-
CN711
and
CN831
CN206
of the Micon board as-
CN206
K
of the
CN711
L
CN21
K
CN831
CN202
CN201
Fig.12
L
Fig.13
(No.MB595)1-11
Hide quick links:
Advertisement
Table of Contents
