3.1.9 Removing the Power trans board assembly
(See Fig.18 to 20)
(1) Remove the one screw Q attaching the Power trans board
assembly. (See Fig.18)
(2) Remove the one screw R attaching the Power trans board
assembly. (See Fig.19)
(3) Disconnect the connector wire from Power cord connected
to connector
CN101
and disconnect the connector wire
from Power transformer connected to connector
the Power trans board assembly. (See Fig.20)
CN102
of
CN101
Q
Fig.18
R
Fig.19
CN102
Fig.20
(No.MB595)1-13