See Fig. - JVC UX-G45B Service Manual

3.1.2 Removing the top cover

(See Fig.1, 3)

(1) Remove the four screws D attaching the top cover and the
side panel. (See Fig.3)
(2) Remove the one screw E attaching the top cover. (See
Fig.1)
Caution:
When take out the top cover, raise slowly, take care not to
break the two claws of the front panel.
3.1.3 Removing the power trans board
(See Fig.4)
(1) Remove the two screws F attaching the power trans board.
(2) Disconnect the connector wire from the connector
of the main board.
(3) Disconnect the connector wires from the connectors
CN901, CN902 of the trans board.
1-8 (No.MB533)
D
b
CN103
CN902
D
Fig.3
CN901 CN103
F
Connector wire
Fig.4
b
a