Table of Contents
Advertisement
3.1
Main body
3.1.1 Removing the REAR COVER (See Fig.1 to 4)
(1) Remove the two screws A attaching the both side of REAR
COVER. (See Fig.1)
(2) Remove the two screws B attaching the REAR COVER.
(See Fig.2)
(3) Remove the two screws C, two screws D and two screws
E attaching the REAR COVER. (See Fig.3)
(4) Disconnect the connector wire from MAIN BOARD assem-
bly connected to connector
BOARD assembly. (See Fig.4)
A
SECTION 3
DISASSEMBLY
CN1102
of the POWER
Fig.1
B
Fig.2
C
Fig.3
Fig.4
D
E
CN1102
(No.MB634)1-7
Advertisement
Table of Contents
