See Fig. - JVC UX-G45B Service Manual

3.1.9 Removing the CD board

(See Fig.9)

(1) Remove the three screws R attaching the CD Board.
(2) Disconnect the connector wires connected to the CD
mechanism assembly from the connectors BN702,
the CD board.
(3) Disconnect the card wire from the connector
CD board.
3.1.10 Removing the rear panel
(See Fig.5, 13)
(1) Remove the one screw S attaching the rear panel. (See
Fig.5)
(2) Disengage the two hooks d and remove the rear panel.
(See Fig.13)
3.1.11 Removing the power transformer
(See Fig.14)
(1) Remove the four screws T attaching the power transform-
er.
1-12 (No.MB533)
B703 of
CN701 of the
d
Fig.13
T
T
Fig.14