Removing The Main Board Assembly; Removing The Power Board Assembly; See Fig. - JVC UX-G38B Service Manual

3.1.5 Removing the Main board assembly

(See Fig.10)

(1) Remove the one screw G attaching the Main board assem-
bly.
(2) Disconnect the connector
Main board assembly and Power board assembly.
(3) Disconnect the connector
assembly and Jack boaed assembly.
(4) Disconnect the connector wire from CD mechanism as-
sembly connected to connector
assembly.

3.1.6 Removing the Power board assembly

(See Fig.11)
(1) Disconnect the card wire from DVD mechanism assembly
connected to connector
bly.
(2) Remove the two screws H attaching the Power board as-
sembly.
(3) The slide is done, and it pulls and it raises it in the direction
of the arrow.
CN373 and CN709 connected
CN401 connected Main board
CN708 of the Main board
CN701 of the Power board assem-
CN709
CN708
CN401
Fig.10
H
Fig.11
CN373
G
H
CN701
(No.MB611)1-11