Cleaning; Battery Life, Status, And Replacement - Fluke MicroScanner 2 User Manual

2
MicroScanner Cable Verifier
Users Manual

Cleaning

Clean the display with glass cleaner and a soft, lint-free
cloth. Clean the case with a soft cloth dampened with
water or water and a mild soap.

To avoid damaging the display or the case, do
not use solvents or abrasive cleansers.

Battery Life, Status, and Replacement


Warning
To avoid possible electric shock or personal
injury:

Turn off the tester and disconnect all test leads
before replacing the battery.

Use only the correct type of batteries, properly
installed in the case, to power the tester.
The batteries last for about 20 hours of typical use.
Replace the tester's batteries when the low battery

indicator ( ) appears. See Figure 28.
40
Caution

You can use the following types of AA (IEC LR6) batteries in
the tester:

Alkaline

Lithium

Rechargeable nickel-metal hydride (NiMH)

Rechargeable nickel-cadmium batteries (NiCD)
Figure 28. Replacing the Tester's Batteries
egk28.eps