Hide Feature Access Codes - Yealink SIP-T2 Series Administrator's Manual

To configure BLF List DSS keys manually via web user interface:
Click on Dsskey->Line Key.
1.
In the desired DSS key field, select BLF List from the pull-down list of Type.
2.
Repeat the step 2, configure more BLF list DSS keys.
3.
Click Confirm to accept the change.
4.

Hide Feature Access Codes

Hide Feature Access Codes feature enables the IP phone to display the feature name instead of
the dialed feature access code automatically. For example, the dialed call park code will be
replaced by the identifier "Call Park" when you park an active call.
The hide feature access codes feature is applicable to the following features:
Voice Mail

Pick up

Group Pick up

Barge In (not applicable to SIP-T19(P) E2 IP phones)

Retrieve

Call Park

Call Pull (not applicable to SIP-T19(P) E2 IP phones)

Procedure
The hide feature access codes feature can be configured using the following methods.
Central Provisioning
(Configuration File)
Web User Interface
<y0000000000xx>.cfg
Configuring Advanced Features
Configure the hide feature access
codes feature.
Parameter:
features.hide_feature_access_codes.
enable
Configure the hide feature access
codes feature.
Navigate to:
http://<phoneIPAddress>/servlet?p
567