Play Local Dtmf Tone - Yealink SIP-T2 Series Administrator's Manual

Administrator's Guide for SIP-T2 Series/T19(P) E2/T4 Series/T5 Series IP Phones
To configure transfer via DTMF via web user interface:
Click on Features->General Information.
1.
Select the desired value from the pull-down list of DTMF Replace Tran.
2.
Enter the specified DTMF digits in the Tran Send DTMF field.
3.
Click Confirm to accept the change.
4.

Play Local DTMF Tone

Play local DTMF tone allows IP phones to play a local DTMF tone during an active call. If this
feature is enabled, you can hear the DTMF tone when pressing the IP phone's keypad during a
call.
Procedure
Configuration changes can be performed using the following methods.
Central Provisioning
(Configuration File)
Web User Interface
772
<y0000000000xx>.cfg
Configure play local DTMF tone.
Parameter:
features.play_local_dtmf_tone_enable
Configure play local DTMF tone.
Navigate to:
http://<phoneIPAddress>/servlet?p=f
eatures-general&q=load