Selecting The Hdmi 4K Signal Format (4K Mode); Switching The Dts Format Notification Setting (Dts Mode); Backing Up/Recovering The Settings (Backup/Restore) - Yamaha AVENTAGE RX-A3080 Owner's Manual

Selecting the HDMI 4K signal format (4K MODE)

4K MODE
MODE 1
Selects the format of signals input/output at the unit when HDMI 4K compatible TV and
playback device are connected to the unit.
Settings
Inputs/outputs 4K signals shown in the table below.
MODE 1
Depending on the connected device or HDMI cables, video may not be displayed
correctly. In this case, select "MODE 2".
MODE 2 Inputs/outputs 4K signals shown in the table below.
Format
RGB 4:4:4
YCbCr 4:4:4
4K/60, 50 Hz
YCbCr 4:2:2
YCbCr 4:2:0
RGB 4:4:4
4K/30, 25, 24 Hz YCbCr 4:4:4
YCbCr 4:2:2
Y
When "MODE 1" is selected, use a Premium High Speed HDMI Cable or Premium High Speed Cable with Ethernet.
MODE 1 MODE 2
8 bit 10 bit 12 bit 8 bit 10 bit
, - -
, - -
, -
, , -
, , -
, , -
, ,

Switching the DTS format notification setting (DTS MODE)

DTS MODE
Switches the DTS format notification setting.
This setting informs the video device (such as BD/DVD player) about the DTS formats that the
unit supports.
Settings
This mode conforms to the DTS:X standard.
MODE 1
Use this setting under normal circumstances.
Use this setting if the video device (such as BD/DVD player) fails to properly output
MODE 2
a DTS signal even when it is playing back DTS-HD or DTS:X content.

Backing up/recovering the settings (BACKUP/RESTORE)

12 bit
BACKUP/RESTORE
Backups and restores all the unit's setting to a USB memory device. Prepare a USB memory
device using FAT16 or FAT32 format in advance.
Choices
BACKUP Creates backup of the settings of the unit in the USB memory device.
Restores the settings of the unit from the backup (available only when backup has
RESTORE
been created).
■ Backup/rstore procedure
1
Connect the USB memory device to the USB jack on the front panel.
2
To start the process, press STRAIGHT to select "BACKUP" or "RESTORE" and then press INFO
on the front panel.
3
Press INFO again after the confirmation message appears on the front display.
X
To cancel the operation, press STRAIGHT.
161
En
MODE 1
BACKUP