Fluke 729 User Manual page 18

729/729FC
Users Manual
Number
VDC button. Push to select the measure dc
K
voltage function.
SETUP button. Push to enter the Setup menu
to change operating parameters. See Setup
L
Menu.
TASKS button. Push to enter the Tasks menu.
M
See TASKS Menu.
VENT button. Push to release pressure at the
internal pressure port. VENTING shows on the
N
display as the Product vents. VENTED shows
after venting is complete.
12
fTable 3. Buttons (cont.)
Description Number
SOURCE PRESSURE button. Use this function
to output (source) a target pressure from the
Product. Use the arrows to select the Setpoint
O
field and enter the values with the number
buttons.
MEASURE PRESSURE button. Use this function
P
for pressure measurement mode.
HART button. Push to enter HART
Q
communication mode.
HOLD button. Push to freeze the reading on the
display. Push it a second time to release the hold
R
on the display. Push and hold to capture the
screen and save into memory.
Description