729/729FC
Users Manual
•
Do not use test leads if they are damaged.
Examine the test leads for damaged
insulation, exposed metal, or if the wear
indicator shows. Check test lead
continuity.
•
Keep fingers behind the finger guards on
the probes.
•
Only assemble and operate high-pressure
systems if you know the correct safety
procedures. High-pressure liquids and
gases are hazardous and the energy from
them can be released without warning.
•
Remove the input signals before you clean
the Product.
•
Use only specified replacement parts.
•
Have an approved technician repair the
Product.
•
Do not disassemble or crush battery cells
and battery packs.
•
Batteries contain hazardous chemicals that
can cause burns or explode. If exposure to
chemicals occurs, clean with water and get
medical aid.
4
•
Do not put battery cells and battery packs
near heat or fire. Do not put in sunlight.
•
Use only Fluke approved power adapters
to charge the battery.
•
Disconnect the battery charger and move
the Product or battery to a cool, non-
flammable location if the rechargeable
battery becomes hot (>50 °C) during the
charge period.
•
Replace the rechargeable battery after
5 years of moderate use or 2 years of
heavy use. Moderate use is defined as
recharged twice a week. Heavy use is
defined as discharged to cutoff and
recharged daily.
Do not disassemble the battery.
•
•
Do not short the battery terminals together.