Fluke 729 User Manual page 17

Number
Power button. Push to turn on or turn off
A
the Product.
BACK button. Push to move to the
previous user interface (UI) screen. When
navigating through the screens, BACK can
B
move out of most screens and with
repeated pushes, can take you all the way
to the startup screen.
F1-F4 softkeys. Performs the specified
function of the label above each softkey on
C
the display. These labels change
throughout the UI.
Arrow buttons. Push to move the display
cursor left, right, up, or down. Cursor
D
highlights in yellow over the selection.
SELECT button. Push to make a selection
on the UI. Cannot confirm number or
E
character choices with this button (push
ENTER).
Description
Table 3. Buttons
Number
Display brightness button. Push to change the
F
display brightness from dim to bright and back again.
Numeric keypad. Used when a numeric entry is
G
necessary.
ENTER button. Push to make a selection on the UI.
Only ENTER confirms numbers and characters.
H
Confirm all editable items with ENTER.
CLEAR (ZERO) button. Push to clear highlighted
entry. When PI/PV/IP/SWT starts, push to zero the
I
pressure reading.
mA button. Push to select mA measure function.
J
Automatic Pressure Calibrator
Description
Buttons
11