Operating this unit
! The built-in CD player and the multi-CD player
are set to the same source level adjustment
! External unit 1 and external unit 2 are set to
the same source level adjustment volume
Adjusting initial settings
Using the initial settings, you can customize
various system settings to achieve optimal per-
formance from this unit.
1 Function display
Shows the function status.
Press SOURCE and hold until the unit
Press MULTI-CONTROL and hold until
the calendar appears in the display.
Turn MULTI-CONTROL to select one of
the initial settings.
Turn MULTI-CONTROL to switch between the
functions in the following order:
Calendar—Clock—OFF CLOCK (off clock)—
FM STEP (FM tuning step)—AUTO PI (auto PI
seek)—WARNING (warning tone)—AUX1
(auxiliary input 1)—AUX2 (auxiliary input 2)—
REAR SP (rear output and subwoofer control-
ler)—TEL (telephone muting/attenuation)—
TITLE (language selection)—COLOR (illumina-
tion color)—BT AUDIO (Bluetooth audio)—
PIN CODE INPUT (pin code input)—
EDIT DEVICE NAME (device name edit)—
BT INFO (Bluetooth version information)—
BT RESET (Bluetooth reset)
Use the following instructions to operate each
# To cancel initial settings, press BAND.
# In some cases, you cannot select BT AUDIO
when the bluetooth audio player has been con-
Setting the date
You can adjust the calender display, which
can be displayed when the sources are off.