Table of Contents
Advertisement
Available languages
Available languages
Operating this unit
Connecting to a Bluetooth
audio player automatically
This unit automatically connects to the Blue-
tooth audio player that was most recently con-
nected to this unit. Note that if you want to
use other devices, automatic connection can-
not be performed.
! This feature is not available if automatic
connection from this unit has been estab-
lished to your cellular phone.
! While you are operating in the function
menu of TELEPHONE source or BT AUDIO
source, automatic connection to your Blue-
tooth audio player is not initiated.
1
Use MULTI-CONTROL to select
AUTO CONNECT in the function menu.
2
Press MULTI-CONTROL to turn auto-
matic connection on.
# To turn automatic connection off, press
MULTI-CONTROL again.
Playing songs on Bluetooth
audio player
1
Use MULTI-CONTROL to select PLAY in
the function menu.
2
Press MULTI-CONTROL to start play-
back.
Pausing a song
1
Use MULTI-CONTROL to select PAUSE in
the function menu.
2
Press MULTI-CONTROL to turn pause
on.
Playback of the current song pauses.
# To turn pause off, press MULTI-CONTROL
again.
Stopping playback
1
Use MULTI-CONTROL to select STOP in
the function menu.
2
Press MULTI-CONTROL to stop the play-
back.
Playback of the current song stops.
Disconnecting a Bluetooth
audio player
1
Use MULTI-CONTROL to select
DISCONNECT AUDIO in the function menu.
2
Press MULTI-CONTROL to disconnect
the Bluetooth audio player.
Disconnected is displayed. The Bluetooth
audio player is now diconnected from this
unit.
Displaying BD (Bluetooth
Device) address
1
Use MULTI-CONTROL to select
DEVICE INFO in the function menu.
The device name (e.g., PIONEER BT UNIT) of
this unit appears in the display.
You can edit the device name. Refer to Editing
device name on page 45.
2
Push MULTI-CONTROL left to switch to
the BD address.
12-digit hexadecimal string is displayed.
# Pushing MULTI-CONTROL right returns to the
device name.
Section
02
23
En
Advertisement
Chapters
Table of Contents
