Page of 130
Download Print This PagePrint Bookmark Comment

Pioneer DEH-P65BT Operation Manual: Setting The Clock; Turning The Off Clock Display On Or Off; Setting The Fm Tuning Step; Switching Auto Pi Seek

Cd rds receiver.
Hide thumbs

Advertisement

Section
02
Operating this unit
1
Use MULTI-CONTROL to select calendar.
2
Push MULTI-CONTROL left or right to
select the segment of the calendar display
you wish to set.
Pushing MULTI-CONTROL left or right will se-
lect one segment of the calendar display:
Day—Month—Year
As you select segments of the calendar dis-
play the segment selected will blink.
3
Push MULTI-CONTROL up or down to
set the date.
Pushing MULTI-CONTROL up will increase
the selected day, month or year. Pushing
MULTI-CONTROL down will decrease the se-
lected day, month or year.

Setting the clock

Use these instructions to set the clock.
1
Use MULTI-CONTROL to select Clock.
2
Push MULTI-CONTROL left or right to
select the segment of the clock display you
wish to set.
Pushing MULTI-CONTROL left or right will se-
lect one segment of the clock display:
Hour—Minute
As you select segments of the clock display
the segment selected will blink.
3
Push MULTI-CONTROL up or down to
put a clock right.
Note
You can match the clock to a time signal by
pressing MULTI-CONTROL.
! If the minute is 00 to 29, the minutes are
rounded down. (e.g., 10:18 becomes 10:00.)
! If the minute is 30 to 59, the minutes are
rounded up. (e.g., 10:36 becomes 11:00.)
42
En
Turning the off clock display on
or off
If the off clock display is turned on, when the
sources are off, the clock appears on the dis-
play.
1
Use MULTI-CONTROL to select
OFF CLOCK.
2
Press MULTI-CONTROL to turn the off
clock display on.
# To turn the off clock display off, press
MULTI-CONTROL again.
Setting the FM tuning step
Normally the FM tuning step employed by
seek tuning is 50 kHz. When AF or TA is on,
the tuning step automatically changes to 100
kHz. It may be preferable to set the tuning step
to 50 kHz when AF is on.
1
Use MULTI-CONTROL to select FM STEP.
2
Press MULTI-CONTROL to select the FM
tuning step.
Pressing MULTI-CONTROL repeatedly will
switch the FM tuning step between 50 kHz
and 100 kHz while AF or TA is on. The selected
FM tuning step will appear in the display.
Note
The tuning step remains at 50 kHz during manual
tuning.
Switching Auto PI Seek
The unit can automatically search for a differ-
ent station with the same programming, even
during preset recall.
1
Use MULTI-CONTROL to select AUTO PI.
2
Press MULTI-CONTROL to turn Auto PI
seek on.
# To turn Auto PI seek off, press
MULTI-CONTROL again.

Advertisement

   Also See for Pioneer DEH-P65BT

   Related Manuals for Pioneer DEH-P65BT

Comments to this Manuals

Symbols: 0
Latest comments: