Operating this unit
Press MULTI-CONTROL to make a call.
If your cellular phone features voice recogni-
tion technology, you can make a call by voice
! Operation varies depending on the type of
your cellular phone. Refer to the instruction
manual that came with your cellular phone
for detailed instructions.
! This function can be operated only when
the connection is established with HFP
(Hands Free Profile).
Press BAND and hold until VOICE ap-
pears in the display.
VOICE appears in the display. When
VOICE DIAL ON is displayed, voice recogni-
tion function is now ready.
# If your cellular phone does not feature voice
recognition function, NO VOICE DIAL appears in
the display and opearation is not available.
Pronounce the name of your contact.
Taking a phone call
Answering an incoming call
Even when a source other than TELEPHONE is
selected or when this unit is turned off, you
can still answer incoming calls. If you set this
unit to automatically answering incoming
calls, refer to Setting the automatic answering
on page 35.
When a call comes in, press
# If the private mode is selected on the cellular
phone, hands-free phoning may not be per-
To end the call, press PHONE.
The estimated call time appears in the display
(this may differ slightly from the actual call
# You may hear a noise when you disconnect
Rejecting an incoming call
You can reject an incoming call. To reject all
incoming calls automatically, refer to Setting
the automatic rejecting on page 35.
% When a call comes in, press PHONE.
The call is rejected.
# The rejected call is recorded in missed call
history list. About the missed call history list,
refer to Using the Call History on page 33.
Answering a call waiting
If while you are talking on the phone another
call comes in, the number (or name if it is in
your phone book) of the new caller appears in
the display to signal that you have a call wait-
ing. You can put the first caller on hold while
you answer the call waiting, or you can choose
to reject the call, in which case the number is
logged as a missed call.
! Depending on the cellular phone, this func-
tion cannot be used.
! This unit can only handle three calls simul-
taneously. Therefore, depending on the cel-
lular phone used with this unit, this
function may not be performed correctly.
Press MULTI-CONTROL to answer a call
# Pressing MULTI-CONTROL switches between
callers on hold.
Press PHONE to end all calls.
Pressing PHONE ends all calls including a call
waiting on line.
# Except for switching between the calls on line,
you cannot end each call waiting individually.
Pressing PHONE ends all calls.
Rejecting a call waiting
If you would rather not interrupt your current
call to answer a call waiting, you can reject it
and have the number added to the missed call
% Press PHONE to reject a call waiting.