Table of Contents
Advertisement
SNOOZE ALARM
After the radio or alarm sounds, you may press the SNOOZE/SLEEP button (#6) for a few
more minutes sleep. The alarm will stop for approximately 9 minutes and then turn on again.
CHECKING THE ALARM TIME
In ON mode, Press and hold ALARM SET/DIM button (#4) repeatedly to check the Alarm
Sound mode, Alarm Time, Volume Level.
The sleep timer allows the unit turn off automatically after a designated time has elapsed.
1. Press and hold the
2. The time in minutes 120-110-100-90-80-70-60-50-40-30-20-10-1-OFF shifting on the LCD
display.
3. Press and hold the
4. To cancel the sleep timer, press and hold the
shows OFF.
5. To turn the unit "Off" before the selected length of time, tap the
any time.
Note: To check the remaining sleep time, tap the SLEEP BUTTON (#2) once.
Tap ALARM SET/DIM button (#4) to turn on the backlight. Tape ALARM SET/DIM button (#4)
again to turn off the backlight
In case of malfunction due to electrostatic discharge, press the reset button inside the battery
compartment.
Important : After reset, all the settings will be lost. Follow the procedures in the manual to
reset the clock, alarm time and radio presets once again.
1. Clean the unit with soft cloth. Solvent or detergent should never be used.
2. Avoid operating your unit under direct sunlight.
3. Keep your unit away from heating appliances and sources of electrical noise such as
fluorescent lamps or motors.
4. For better Clock Display clarity, avoid operating the unit under direct sunlight or in strong
room illumination.
SLEEP OPERATION
/SLEEP button (#1) to turn on SLEEP function.
/SLEEP button (#1) until the desired time appear on the LCD display.
DIMMER CONTROL
RESETTING THE UNIT
CARE AND MAINTENANCE
/SLEEP button (#1) until until the timer
/SLEEP button (#1) at
Hide quick links:
Advertisement
Table of Contents
