NOMA 052-8399-0 Owner's Manual page 9

Installing Receiver Assembly
Once the connection has been made, the receiver inserts into the drop rod hanging
bracket. The canopy comes up to cover the receiver and bracket .
!
VIEW AFTER INSTALLATION
!
!
9. Loosen two canopy screws part way, and then push the canopy upwards by inserting canopy
screw heads into key hole slots, rotate the canopy till it is locked in place, and finally tighten canopy
screws (Fig. 9).
Attach the decorative cap to canopy, and rotate it clockwise until
tight.
10. The slide switch on fan fixture sets direction of fan rotation. Select the desired direction of fan
rotation. Push the slide switch down for "Forward" and up for "Reverse" (Fig. 10).
!
!
Note: Wait for fan to stop before reversing the direction of blade rotation.
IMPORTANT: Reverse switch must be set either completely
up or completely DOWN for fan to function. If the reverse
switch is set in the middle position, fan will not operate.
Lea ve unconnected and do not cut .
Fig.10
Hanger Bracket
Canopy Screw
Canopy
Key Hole Slot
Decorative Cap
Fig. 9
Reverse
Fan Fixture
Forward
Fig. 10
7
Slide Switch