NOMA 052-8399-0 Owner's Manual page 7

5. Loosen the collar screws part way. Insert the downrod into the collar.
Slide hanger pin through holes of collar and downrod (Fig. 5).
6. Insert and tighten the two collar screws. Slide lock pin into hanger
pin until it is locked into position (Fig. 6).
7. Hang the fan on hanger bracket, and make sure the slot of octagonal
hanger ball is snapped into the clip of hanger bracket exactly (Fig. 7).
!
NOTE: There are four slots in octagonal hanger ball. Adjust the octagonal hanger
ball to get desired direction, and then snap the clip of hanger bracket
into the slot of octagonal hanger ball.
For added security attach safety cable from fan unit to "J" hook in outlet box.
Secure by looping zip tie through safety cable and "J" hook. Tighten zip tie
securely .
Motor Wires
Hanger Pin
Fig. 5
Collar Screws
Fig. 6
Fig.7
Safety
Cable
"
J" hook
Zip Tie
5
Canopy
Downrod
Decorative Cap
Collar
Lock Pin
Hanger Bracket
Slot
clip