Maintenance; Figure 1-8 Figure 1-8 Wiring Extension Cable To Xmt-T (Pipe/Wall Mount); Wiring Extension Cable To 5081T; Wiring Extension Cable To 1066-T - Emerson Rosemount 245 Instruction Manual

Instruction Manual
LIQ-MAN-245
Figure1-8 Wiring extension cable to Xmt-T (Pipe/Wall Mount)
Figure1-9 Wiring extension cable to 1066-T
TB2
RTN
SENSE
RTD IN
SHLD
1.8

Maintenance

The only routine maintenance required during the operational life of the sensor is to ensure
that there are no deposits plugging the sensor or coating the inside of the contact rings.
Some customers find it advantageous to periodically replace process (Tri-Clamp) gaskets to
ensure adequate process seals. Rebuilding the sensor must be done at the factory.
245 Sensor
TB1
RCV B
RCV A
RSHLD
DRV B
DRV A
DSHLD
CLEAR
CLEAR SHIELD
CONNECTED. I
IN HIGH TEMPE
(OPTION-03) ON
228-56
Figure 1-10 Wiring extension Cable to 5081T
245 Sensor
June 2017
7