Table of Contents
Advertisement
1
3
4
5
6
3
1.
Power:
Turn the air conditioner on and off.
2.
Cool:
Press the COOL button to COOL mode.
3.
and
:
Use these buttons on the control
panel and remote to increase or decrease the
Set Temperature or Timer. Temperature range:
61 ~88
or 16 ~31 .
4. Sleep:
Press the SLEEP button, the Sleep
Light will be on after 10s, and all the left
lights will be off. In SLEEP mode, the
air-conditioner will automatically adjust the
temperature and fan speed to make the room
more comfortable during the night. The set
temperature will automatically raise by 1
every 30-60 minutes and at most change six
times until the set temperature is 28
every running time depends on the set
temperature.
5. Timer:
and remote to set the Timer.
Timer Off: The timed stop is programmed by
pressing TIMER button. Set the rest time by
pressing the button
time displayed is to your demand then press
TIMER button again.
2
Timer On: When the unit is off, press TIMER
button at the first time, set the temperature with
pressing the button
button at the second time, set the rest time with
pressing the button
7
button at the third time, confirm the setting, then
the rest time to next automatical switching-on
8
could be read on the display of the machine.
Note: It can be set to automatically turn off or on
9
in 0.5-24 hours. Each press of the
buttons will increase or decrease the timer. The
10
Timer can be set in 0.5 hours increment below
10 hours and 1 hour increment for 10 hours or
above. The SET light will turn on while setting.
To cancel the setted function, press the TIMER
button again.
6. Auto Mode:
into AUTO mode directly. In this mode the fan
speed and the temperature are set automatically
according to the room temperature (tested by
the temperature sensor which is incorporated
in the indoor unit.).
7. Fan Speed:
choose the fan speed options. You can choose
Hi, Med, Lo or auto speed in COOL mode and
choose Hi, Med, Lo in FAN mode.
8. Display:
switch off/on all lights or LED display.
9.
Eco:
will turn on. In ECO mode, the unit will turn-off
once the room is cooled to the user set
temperature. The fan will also be off at this
point. The unit will turn back on when the room
temperature rises above the user set
temperature.Before the compressor stars, the fan
motor will keep running 10 minutes-stop 20
seconds-and again, to provide much more
comfortable feeling, and save the energy.
. And
10.
Fan Only:
ONLY mode.
11
Use these buttons on the control panel
or
or
or
Press AUTO MODE button enter
Press the FAN SPEED button to
To press the DISPLAY button, it can
When the unit is in ECO mode, the light
Press the Fan Only button to FAN
until the rest
. Press TIMER
. Press TIMER
Hide quick links:
Advertisement
Table of Contents
