Convenience Opening Feature - Mercedes-Benz S-Class Coupe Operator's Manual

Side windows
86
G
WARNING
The reversing feature does not react:
to soft, light and thin objects, e.g. small fin-
R
gers
while resetting
R
This means that the reversing feature cannot
prevent someone being trapped in these sit-
uations. There is a risk of injury.
Make sure that no body parts are in close
proximity during the closing procedure. If
someone becomes trapped, press the switch
to open the side window again.
Opening and closing the side win-
dows
The switches for all side windows are located on
the driver's door. There is also a switch for the
front-passenger side window on the front-
passenger door.
The switches on the driver's door take prece-
dence.
Front left
:
; Front right
Rear right
=
Rear left
?
Turn the SmartKey to position 1 or 2 in the
X
ignition lock.
To open manually: press and hold the cor-
X
responding button.
To open fully: press the switch beyond the
X
point of resistance and release it.
Automatic operation is started.
To close manually: pull and hold the corre-
X
sponding button.
To fully close the front side windows: pull
X
the button beyond the point of resistance and
release it.
Automatic operation is started.
To interrupt automatic operation: press/
X
pull the corresponding switch again.
You can continue to operate the side windows
after you switch off the engine or remove the
SmartKey. This function remains active for five
minutes or until you open a door.
Before opening or closing the side windows, a
check is carried out to see whether a valid
SmartKey is in the vehicle. The check is carried
out if you use the start/stop button instead of a
SmartKey in the ignition and you press or pull a
button while the engine is switched off. This is
carried out by means of a brief radio connection
between the vehicle and the SmartKey.
Convenience opening
General notes
If the SmartKey is in close proximity to the vehi-
cle, the convenience opening function is availa-
ble.
You can ventilate the vehicle before you start
driving.
To do this, the SmartKey is used to carry out the
following functions simultaneously:
unlock the vehicle
R
open the side windows
R
switch on the seat ventilation for the driver's
R
seat
The "convenience opening" feature is also avail-
able when the vehicle is unlocked.
Convenience opening
Keep the % button pressed until the side
X
windows are in the desired position.
To interrupt convenience opening: release
X
the % button.